Windows 2008 server RAC installation
DBAsupport.com Forums - Powered by vBulletin
Results 1 to 6 of 6

Thread: Windows 2008 server RAC installation

  1. #1
    Join Date
    Oct 2010
    Posts
    11

    Windows 2008 server RAC installation

    im facing this error when i run :
    cluvfy stage -post hwos -n winrac1,winrac2 -verbose
    ===============================
    Interface information for node "winrac2"
    Name IP Address Subnet Gateway Def. Gateway HW Addre
    ss MTU
    ------ --------------- --------------- --------------- --------------- --------
    --------- ------
    Public 203.223.137.69 203.223.137.0 On-link UNKNOWN 00:1E:68
    :A9:F4:01 1500
    private 10.10.10.69 10.10.10.0 On-link UNKNOWN 00:1E:6
    8:A9:F4:00 1500


    Check: Node connectivity of subnet "203.223.137.0"
    Result: Node connectivity passed for subnet "203.223.137.0" with node(s) winrac2



    Check: TCP connectivity of subnet "203.223.137.0"
    Source Destination Connected?

    ------------------------------ ------------------------------ --------------
    --
    WinRac1:203.223.137.67 winrac2:203.223.137.69 failed


    ERROR:
    PRVF-7617 : Node connectivity between "WinRac1 : 203.223.137.67" and "winrac2 :
    203.223.137.69" failed
    Result: TCP connectivity check failed for subnet "203.223.137.0"


    Check: Node connectivity of subnet "10.10.10.0"
    Result: Node connectivity passed for subnet "10.10.10.0" with node(s) winrac2


    Check: TCP connectivity of subnet "10.10.10.0"
    Source Destination Connected?

    ------------------------------ ------------------------------ --------------
    --
    WinRac1:203.223.137.67 winrac2:10.10.10.69 failed


    ERROR:
    PRVF-7617 : Node connectivity between "WinRac1 : 203.223.137.67" and "winrac2 :
    10.10.10.69" failed
    Result: TCP connectivity check failed for subnet "10.10.10.0"


    Interfaces found on subnet "203.223.137.0" that are likely candidates for VIP ar
    e:
    winrac2 Public:203.223.137.69

    WARNING:
    Could not find a suitable set of interfaces for the private interconnect

    Result: Node connectivity check failed
    Shared storage check was successful on nodes "winrac2"

    Post-check for hardware and operating system setup was unsuccessful.
    Checks did not pass for the following node(s):
    WinRac1 : 203.223.137.67,winrac1
    ===================
    can using "net use \\nodename\c$" without password keying
    firewall already disable
    no antivirus installed

    any idea on this error ?

  2. #2
    Join Date
    Oct 2010
    Posts
    11
    i manage to get the solution. thanks.

  3. #3
    Join Date
    Mar 2006
    Location
    Charlotte, NC
    Posts
    865
    would you mind to share?

    Regards,
    Vijay Tummala

    Try hard to get what you like OR you will be forced to like what you get.

  4. #4
    Join Date
    Oct 2010
    Posts
    11
    Oracle told me, that is case sensitive for the hostname.
    my hostname : WinRac1, WinRac2
    but i run the command :
    cluvfy stage -post hwos -n winrac1,winrac2 -verbose

    after change :
    cluvfy stage -post hwos -n WinRac1,WinRac2 -verbose

    it works !!

  5. #5
    Join Date
    Mar 2006
    Location
    Charlotte, NC
    Posts
    865
    thanks for sharing ...

    Regards,
    Vijay Tummala

    Try hard to get what you like OR you will be forced to like what you get.

  6. #6
    Join Date
    Oct 2010
    Posts
    11
    welcome

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  



Click Here to Expand Forum to Full Width