-
Rman Restoration
Hi,
Can I restore Rman backup tape to a new DRC server? If yes, please tell me how to go about it?
Thanks in advance.
-
Hi
You can try the steps outlined in the note below
Restoring an RMAN Backup to Another Node
----------------------------------------
In certain circumstances, it may be desirable to restore a database from an RMAN
backup onto a machine other than the original host. For example, to recover
data at a given point in time, or to duplicate a production instance.
From version 8.1.5, the RMAN 'duplicate' command could be used, as discussed in
Note:73912.1. However, prior to 8.1.5, the 'duplicate' command does not exist.
The example assumes:
- the target database is on host A
- the database is to be restored onto host B
- the directory structure of host B is different to host A
- the ORACLE_SID will not change for the restored database
- a recovery catalog is being used
- the backups were carried out to disk (for illustrative purposes, and to
disassociate from any media manager specific issues)
The following steps are required:
- backup the target on host A
- list the datafile locations on host A
- make the backup available to host B
- make a copy of the init.ora available to host B
- edit the init.ora to reflect directory structure changes
- configure SQL*Net connectivity from host to the recovery catalog and
duplicated database
- set up a password file for the duplicated database
- startup nomount the duplicated database
- RMAN restore the controlfile(s)
- mount the database
- restore and rename the datafiles
- recover and open the database
These steps are expanded further below.
1.0 Backup the Target on Host A
-------------------------------
The target database needs to be backed up using RMAN.
The following is one example of RMAN doing an online database backup. In this
example, the backup sets are written to disk.
run {
allocate channel t1 type disk;
allocate channel t2 type disk;
allocate channel t3 type disk;
#backup the whole db
backup
tag whole_database_open
format '/oracle/backups/BFS/df_%u'
database;
# switch out of the current logfile
sql 'alter system archive log current';
#backup the archived logs
backup
archivelog all
format '/oracle/backups/BFS/al_%u';
# backup a copy of the controlfile that contains records for the
# other backups just made
backup
current controlfile
tag = cf1
format '/oracle/backups/BFS/cf_%u';
}
2.0 List Datafile Locations on Host A
-------------------------------------
The datafile numbers and location on host A are required. These datafile
locations will change on host B (see Section 7.3).
SVRMGR> select file#, name from v$datafile;
file# name
----- ------------------------------
1 /oracle/OFA_base/u01/oradata/V805X/system01.dbf
2 /oracle/OFA_base/u01/oradata/V805X/rbs01.dbf
3 /oracle/OFA_base/u01/oradata/V805X/temp01.dbf
4 /oracle/OFA_base/u01/oradata/V805X/tools01.dbf
5 /oracle/OFA_base/u01/oradata/V805X/users01.dbf
6 /oracle/OFA_base/u01/oradata/V805X/users02.dbf
7 /oracle/OFA_base/u01/oradata/V805X/rbs02.dbf
8 /oracle/OFA_base/u01/oradata/V805X/rcvcat.dbf
The log file names should also be recorded (see Section 7.4).
SVRMGR> select group#, member from v$logfile;
group# member
----- ------------------------------
1 /oracle/OFA_base/u01/oradata/V805X/redo01.log
2 /oracle/OFA_base/u01/oradata/V805X/redo02.log
3 /oracle/OFA_base/u01/oradata/V805X/redo03.log
3.0 Make the Backups Available to Host B
----------------------------------------
3.1 Disk Backups
During restore, RMAN will expect the backup sets to be located in the same
directory as written to during the backup. For disk backups, the DBA can
accomplish this in many ways:
- set up an NFS directory, mounted on both host A and host B
- create the same directory structure on host A and host B
- use of symbolic links on host B
3.2 Tape Backups
The media management software must be configured such that host B is a
media manager client, and can read the backup sets. The media management
vendor should be consulted for support on this issue.
4.0 init.ora on host B
----------------------
The "init.ora" needs to be made available on host B. Any location specific
parameters must be ammended. For example,
- ifile
- *_dump_dest
- log_archive_dest*
- control_files
5.0 SQL*Net configuration
-------------------------
If running rman from host A:
a. connectivity to the catalog remains unchanged
b. configure tnsnames.ora on host A to connect to duplicated db on host B
configure listener.ora on host B to accept connections for duplicated
database
If running rman from host B:
a. configure tnsnames.ora on host B to connect to catalog
listener.ora on catalog host remains unchanged
b. configure tnsnames.ora on host B to connect to duplicated db on host B
configure listener.ora on host B to accept connections for duplicated
database
If running rman from host C (ie, neither host A or host B):
a. connectivity to the catalog remains unchanged
b. configure tnsnames.ora on host C to connect to duplicated db on host B
configure listener.ora on host B to accept connections for duplicated
database
6.0 Setup Password File
-----------------------
In order to allow RMAN remote connections, a password file must be setup
for the duplicated database. For example,
orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=kernel
7.0 Recover Duplicated Database
-------------------------------
7.1 startup nomount the database
SVRMGR> startup nomount pfile=
7.2 restore the controlfile(s)
For example,
run{
allocate channel c1 type disk;
restore controlfile;
}
7.2 mount the database
SVRMGR> alter database mount;
7.3 rename and restore the datafiles, and perform database recovery
RMAN can be used to change the location of the datafiles from the location
on host A (see Section 2) to the new location on host B.
For example,
run {
allocate channel c1 type disk;
allocate channel c2 type disk;
allocate channel c3 type disk;
set newname for datafile 1 to '/oracle/datafiles/system01.dbf';
set newname for datafile 2 to '/oracle/datafiles/rbs01.dbf';
set newname for datafile 3 to '/oracle/datafiles/temp01.dbf';
set newname for datafile 4 to '/oracle/datafiles/tools01.dbf';
set newname for datafile 5 to '/oracle/datafiles/users01.dbf';
set newname for datafile 6 to '/oracle/datafiles/users02.dbf';
set newname for datafile 7 to '/oracle/datafiles/rbs02.dbf';
set newname for datafile 8 to '/oracle/datafiles/rcvcat.dbf';
restore database;
switch datafile all;
}
7.4 recover and open the database
Perform incomplete recovery:
SVRMGR> recover database using backup controlfile until cancel;
Forward the database applying archived redo log files until you decide
to stop recovery by typing cancel at the prompt (assuming that you have
required archived redo log files in the log_archive_dest directory)
You may archive the source database redo log files and apply them at
the target database if required.
SVRMGR> alter database open resetlogs;
Note: this will create the online redo logs in the same location as that
on host A. If this directory location does not exist, then this will fail
with:
ora-344 : unable to recreate online log
The workaround is to rename the logfiles prior to opening the database:
SVRMGR> alter database rename file
'' to '';
Alternatively, the logfile groups can be dropped and recreated. However,
attempts to drop the current logfile group will fail. The current logfile
must be renamed.
regards
Hrishy
-
Hi Hrishy,
Thank you for your reply.... this information should be enough for my restoration..
Rdgs,
GS
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Click Here to Expand Forum to Full Width
|