start an oracle intelligent agent
DBAsupport.com Forums - Powered by vBulletin
Results 1 to 5 of 5

Thread: start an oracle intelligent agent

  1. #1
    Join Date
    Apr 2003
    Posts
    8

    start an oracle intelligent agent

    When I try to start the intelligent agent I am getting an errorlike this.LSNRCTL for IBM/AIX RISC System/6000: Version 8.1.7.0.0 - Production on 15-APR-5

    (c) Copyright 1998 Oracle Corporation. All rights reserved.

    Welcome to LSNRCTL, type "help" for information.

    LSNRCTL> dbsnmp_start

    LSNRCTL> dbsnmp_status

    The db subagent is not started.

    Please give a solution for this.
    Rgds,
    bvg

  2. #2
    Join Date
    Sep 2000
    Location
    Chennai, India
    Posts
    865
    Last edited by ggnanaraj; 05-02-2003 at 02:32 AM.

  3. #3
    Join Date
    Feb 2001
    Location
    Bombay,India
    Posts
    530

    Re: start an oracle intelligent agent

    Hi,
    The Master SNMP Agent is running on the system but has not been configured to communicate with the Intelligent Agent.
    An NMS-00004 error is caused by the Oracle Intelligent Agent process not being able to communicate with the Master SNMP Agent process during startup.
    Following these steps will allow this communication to be successful.
    Solution Description: If you do not need the Master SNMP Agent (snmpd) on process running on the server, you can stop the process and then restart the Intelligent Agent.
    1. Get the process id of snmpd:
    # ps -ef |grep snmpd
    Stop the processs:
    # kill -9 (enter the process number obtained in step 1)
    2. On AIX however, the 'stopsrc' and 'startsrc' command can be used
    to stop and start system deamons.
    To stop the SNMP daemon on AIX, issue the following
    command:
    # stopsrc -s snmpd
    3. Restart the Intelligent Agent
    $ lsnrctl dbsnmp_start

    Regards,
    Rohit Nirkhe,Oracle/Apps DBA,OCP 8i
    oracle-support@indiatimes.com
    Thanks and Regards
    Rohit S Nirkhe
    rohitsnirkhe@rediffmail.com

  4. #4
    Join Date
    Apr 2003
    Posts
    8

    Thanks

    Hi ggnanaraj and Rohitsn,
    Thank you so much for the fast reply. I will try this and let u know.
    Regards,
    Bvg

  5. #5
    Join Date
    Apr 2003
    Posts
    8

    this really worked

    Hi I was going back and forth with Oracle Support regarding this and finally got started. Thnks again for the help.
    bvg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Click Here to Expand Forum to Full Width